Transmogrification Labs
High-quality 3D-printed mod parts for foam dart blasters
ANNOUNCEMENT
Hey everyone! Thank you for visiting my new storefront. I'm in the process of adding all of the products I had on Etsy to this site. I'm also finally able to add some new ones that they were preventing me from offering (due to limitations with their listing interface). This includes a whole lot of new color options too!
If something doesn't look right or is preventing you from checking out, please send me an email and I will get it fixed ASAP.
Also if you need something right away that you know I had on Etsy that isn't on the site yet, send me an email for that too and I'll get it added so you can purchase it. Most of my product prices will now be cheaper too! ☺️
Why Choose Us?
"Us" is a 1-person team printing, designing, and collaborating with others to bring you quality foam blaster mod parts and accessories. I use PETG for all 3D prints unless otherwise noted and this ensures you receive an item that will last a long time even if you leave it in a hot car during the summer or outside.
Categories
Adventure Force Conquest Pro Mod Parts
$0.00
Parts
Color
Please choose
In stock
1
Save this product for later
Adventure Force Conquest Pro Mod Parts
Product Details
| Charm Attachment Point | This item for the Adventure Force Aeon Pro replaces the safety mechanism with a loop that allows you to attach charms to your blaster! Fully compatible with my Quick Trigger for the Aeon Pro. Also compatible with the stock trigger but is more of a difficult install than with my Quick Trigger. May not be fully compatible with other creators' quick triggers. |
Designed by Transmogrification Labs. | Easy but does require opening the blaster. Open up the blaster and remove the existing safety lock. The blaster can then be reassembled and the charm attachment point / safety delete can then be inserted into the hole where the safety lock was. A small bump prevents the piece from going all the way through and attaching a charm will prevent the piece from coming out. |
| FPS Boosting Spring Spacers | Increase the FPS on your Aeon Pro blaster with these drop-in spring spacers. Sits behind the spring rather than behind the plunger head so that unnecessary weight is not put on the plunger (which would have reduced FPS). Comes in two variants. Max, which is the maximum I've been able to push the blaster and reliably catch, and Standard, which is a decent boost but not quite limit testing as the Max variant. |
Designed by Transmogrification Labs. | Open up the blaster and remove the catch and spring. Put the spacer behind the spring, not behind the plunger head, and put it all back together. Done! |
| Priming Hook / Iron Sights | This product attaches to the priming slide of the Adventure Force Aeon Pro for a more comfortable and reliable prime without your hand slipping off the back. This is a must-have for anyone using an upgraded spring in the Aeon Pro as it is a stiff prime even with the stock spring. The Iron Sights version also incorporates a notch and top posts for helping aim down sights. | Designed by Transmogrification Labs. | Installation: Easy. Unscrew the priming slide and separate the halves. Insert the bottom platform of the priming hook / iron sights into the semi-circle then press and screw both halves back together. |
| Quick Trigger | This Quick Trigger for the Adventure Force Aeon Pro replaces the stock trigger and shortens the distance required to fire the blaster. This part is a must for games where you need to get those shots off fast! Functions as a safety delete too! | Designed by Transmogrification Labs. | Installation: Easy. Disassemble the blaster, remove the old trigger, and this one goes right in its place. |
| Skinny Pusher | This "skinny" dart pusher for the Adventure Force Aeon Pro allows you to insert and remove magazines from the blaster without needing to prime the blaster (in other words, with the top prime not pulled back instead of only when priming)*. Also serves as a great replacement if you broke your original pusher somehow (it can happen). You can either keep the O-rings from your original pusher or buy replacement O-rings of the correct size (there is an add-on I offer which is for 3 pusher replacement rings and 2 telescoping tube O-rings to be included). Short-dart-only version removes some of the slack / slop from priming! Message me if you need a custom color option. *Note: You will still not be able to insert or remove a magazine when you don't have the priming slide fully forward or fully backward. This is because the ends of the pusher are still round (because they have to be to make a seal with the tube) and the mag will catch on that portion. |
Remixed by NerfEspeon (https://www.thingiverse.com/NerfEspeon) from an original design by WoodstockNerf (https://www.thingiverse.com/WoodstockNerf). Short-dart-only version remixed by Transmogrification Labs from NerfEspeon's remix. | Installation: Simply disassemble the blaster, remove the old pusher from the plunger tube, take the O-rings off the old pusher if needed, putO-rings on the new pusher, push the pusher back into the plunger tube, and reassemble the blaster. |
| Extended Barrel Clamp | Use longer barrels in the Aeon Pro blaster with this clamping muzzle adapter. | Remixed by Transmogrification Labs from a design by haphazardlynamed (Thingiverse and Printables). | Open up the blaster and remove the stock orange muzzle piece that the barrel is seated inside. Insert your barrel through this clamp and align the clamp with the notch inside of the blaster. Once installed, tighten the clamp using the bolt and nut on it. |
| Flared Magwell | This flared magwell for the Adventure Force Aeon Pro or Nexus Pro allows magazines to be inserted quicker and easier (do it without even looking!). It attaches to the short dart magazine adapter included with the blaster and is compatible with both the original Adventure Force / Dart Zone magazines as well as Worker magazines. This magwell also removes the slop/play that is present with the short dart magazine adapter in most cases (may vary based on main magazine release used). No drilling or permanent modificationsare required! I also have a version available for the Dart Zone Max Stryker in my shop. |
Designed by Transmogrification Labs. | Installation: Slide the flared magwell onto the short dart magazine adapter horizontally. It will snap into place and be ready to use. Depending on the main magazine release you're using and which blaster (Nexus versus Aeon), there may be a slight gap towards the front of the magwell where it meets the body. This is because some replacement magazine releases affect the distance to the body and the Aeon has a shorter distance to the body. This ensures maximum compatibility and so you can interchange the adapter between the two. If you have trouble with it not locking into place, feel free to reach out to me and let me know what main mag release you're using that is causing the issue and I'll see if I can help. This magwell should work with all magazine releases though as I have tested it with several different ones. |
| Safety Delete | Delete the safety from the Aeon Pro blaster with this piece. | Designed by haphazardlynamed (Thingiverse and Printables). | Open up the blaster and remove the stock safety mechanism. Slide this into its place and you're set. |
| Short Main Mag Release | This is a shortened main magazine release for Adventure Force / Dart Zone blasters. Useful for those who primarily use short darts and need to keep the main magazine release a bit more out of the way. To keep the main magazine release even more out of the way, look for the Stubby Main Mag Release in my shop. Tested to be compatible with at least the following blasters: • Adventure Force Aeon Pro • Adventure Force Nexus Pro • Dart Zone Max Stryker • Dart Zone Pro MK-III / MK-3 |
Designed by haphazardlynamed (https://www.thingiverse.com/haphazardlynamed). | Installation: Super easy. Once you have the blaster disassembled, it's just a drop-in replacement using the spring from the stock magazine release. |
| Short Dart Adapter Extended Mag Release | This extended short dart magazine release for the Adventure Force Pro / Dart Zone Max line moves the release for the short dart magazine far enough back for you to engage it without removing your finger from the trigger. This release must be used in combination with the stubby main mag release I sell or an equivalent as this release is positioned very close to the body and therefore cannot work with a normal main mag release. | Remixed by TofuRaptor (https://www.thingiverse.com/TofuRaptor) from an original design by haphazardlynamed (https://www.thingiverse.com/haphazardlynamed). | Installation: Super easy. Once you have the blaster disassembled, it's just a drop-in replacement using the spring from the stock magazine release. |
| Stubby Main Mag Release | This stubby main mag release for the Adventure Force Pro / Dart Zone Max line allows the release to be kept out of the way so it is no longer accidentally hit but is still there if needed to remove a short dart adapter. This is compatible and most commonly used in conjunction with the extended short dart magazine releases I offer or an equivalent release that requires a slimmed main mag release. Once installed, you can push the nub forward (towards the mag) with something like your fingernail or a screwdriver to release the main mag. Tested compatible with the following blasters: • Adventure Force Aeon Pro • Adventure Force Nexus Pro • Dart Zone Max Stryker • Dart Zone Pro MK-3 |
Remixed by Transmogrification Labs from an original design by haphazardlynamed (https://www.thingiverse.com/haphazardlynamed). | Installation: Super easy. Once you have the blaster disassembled, it's just a drop-in replacement using the spring from the stock magazine release. |
