Get better performance and increased FPS from your blaster by switching from a larger bore barrel to a tight 17/32" brass barrel. Additionally, performance can often be gained by selecting a length that is longer than the original barrel.

A set of two 17/32" to 16mm barrel shim adapters are included with every barrel but are not glued on. Glue isn't completely necessary due to the tight fit of the shim adapters but is recommended if you want to guarantee the highest performance possible for the blaster you install it into. Please let me know which blaster you are installing the barrel into as some require different size shims.

It is also recommended to cover the exposed end of your brass barrel with an attachment, shroud, or cap (like what I provide in my store). Brass barrel walls are very thin and can be dangerous if ran into.

Note that some darts may not be a good fit for such a tight barrel diameter. It is recommended that any dart with a head that is the same size or larger not be used with a 17/32" diameter brass barrel as the chance for jamming is significant. Ideally, short darts should be used such as those from Dart Zone, Adventure Force, or Worker.

INCLUDES: 1x Brass Barrel of your selected length. All measurements are approximate but are within 1/8" of the selected length.

INSTALLATION: Simply install in place of the stock barrel. You may require a shim or adapter depending on the blaster. For more details, check out the listings for those items.

DISCLAIMER: All of my products are printed and tested with the utmost attention to detail. Despite this, I am NOT responsible for any damage incurred to you or your blasters through the use of any of these parts by themselves or in combination with others. It is up to you to keep yourself and your blasters in functioning condition. Some prints may have slight imperfections as is common to all 3D printing (especially for PETG). These slight imperfections will not interfere with mechanical function or integrity/strength.

B-STOCK: B-stock items are items that are only defective in appearance and are offered at a discount for this reason. They should function like the normal product unless otherwise specifically noted in the listing.